Bond It Dustproofer & Hardener 5L

Bond It Dustproofer & Hardener 5L

Bond It Dustproofer & Hardener 5L is a premium-grade, chloride-free concrete dustproofer and hardener specifically formulated to penetrate, chemically seal, and strengthen concrete surfaces. Its low viscosity formula deeply penetrates concrete floors to reduce dusting, improve durability, and create a hard-wearing finish suitable for domestic, commercial, and industrial environments.

Suitable for both new concrete floors (minimum 28 days old) and older concrete surfaces, this professional concrete hardener produces a durable, non-dusty finish that helps extend the life of concrete flooring in garages, warehouses, workshops, factories, and other high-traffic areas.

Key Features

• Premium-grade concrete dustproofer and hardener
• Low viscosity formula for deep surface penetration
• Chemically seals and strengthens concrete floors
• Reduces dust formation on concrete surfaces
• Creates a durable and hard-wearing finish
• Suitable for new and existing concrete floors
• Chloride-free formulation
• Ideal for industrial, commercial, and domestic use
• Produces a cleaner, non-dusty surface

Benefits of Bond It Dustproofer & Hardener

• Improves durability and wear resistance of concrete floors
• Creates a cleaner working environment by reducing dust
• Penetrates deeply for long-lasting protection
• Suitable for garages, workshops, and warehouse floors
• Helps extend the life of concrete surfaces
• Easy application process for professional results

Recommended Applications

Bond It Dustproofer & Hardener is ideal for strengthening and sealing a variety of concrete floor surfaces.

• Garage floors
• Warehouse floors
• Factory floors
• Workshop floors
• Industrial concrete surfaces
• Commercial concrete flooring

How to Use

Apply a thin, uniform coat directly onto the concrete surface, brushing thoroughly into the substrate and avoiding puddling. Allow the first coat to cure, normally overnight, before applying a second coat.

Very porous surfaces may require additional applications for optimum performance. After the final coat has been applied, leave for 24 hours to allow the surface to dry completely before washing down.

Do not wash the floor for at least 24 hours after the final application. Very dense power-floated floors may restrict effective penetration.

Important Information

• Suitable for concrete floors only
• Do not use on masonry surfaces
• Not suitable for coloured concrete
• New concrete must be at least 28 days old before treatment

Product Specifications